Product Description
Features of S series reducer
The same model can be equipped with motors of various powers. It is easy to realize the combination and connection between various models.
The transmission efficiency is high, and the single reducer efficiency is up to 96%. three
The transmission ratio is subdivided and the range is wide. The combined model can form a large transmission ratio and low output speed.
The installation forms are various, and can be installed with any foot, B5 flange or B4 flange. The foot mounting reducer has 2 machined foot mounting planes.
Helical gear and worm gear combination, compact structure, large reduction ratio.
Installation mode: foot installation, hollow shaft installation, flange installation, torque arm installation, small flange installation.
Input mode: motor direct connection, motor belt connection or input shaft, connection flange input.
Average efficiency: reduction ratio 7.5-69.39 is 77%; 70.43-288 is 62%; The S/R combination is 57%.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Hardness: | Hardened Tooth Surface |
|---|---|
| Installation: | 90 Degree |
| Layout: | Expansion |
| Gear Shape: | Bevel Gear |
| Step: | Single-Step |
| Type: | Gear Reducer |
| Samples: |
US$ 300/Piece
1 Piece(Min.Order) | |
|---|
Self-Locking Properties in a Worm Gearbox
Yes, worm gearboxes exhibit self-locking properties, which can be advantageous in certain applications. Self-locking refers to the ability of a mechanism to prevent the transmission of motion from the output shaft back to the input shaft when the system is at rest. Worm gearboxes inherently possess self-locking properties due to the unique design of the worm gear and worm wheel.
The self-locking behavior arises from the angle of the helix on the worm shaft. In a properly designed worm gearbox, the helix angle of the worm is such that it creates a mechanical advantage that resists reverse motion. When the gearbox is not actively driven, the friction between the worm threads and the worm wheel teeth creates a locking effect.
This self-locking feature makes worm gearboxes particularly useful in applications where holding a load in position without external power is necessary. For instance, they are commonly used in situations where there’s a need to prevent a mechanism from backdriving, such as in conveyor systems, hoists, and jacks.
However, it’s important to note that while self-locking properties can be beneficial, they also introduce some challenges. The high friction between the worm gear and worm wheel during self-locking can lead to higher wear and heat generation. Additionally, the self-locking effect can reduce the efficiency of the gearbox when it’s actively transmitting motion.
When considering the use of a worm gearbox for a specific application, it’s crucial to carefully analyze the balance between self-locking capabilities and other performance factors to ensure optimal operation.
Worm Gearbox vs. Helical Gearbox: A Comparison
Worm gearboxes and helical gearboxes are two popular types of gear systems, each with its own set of advantages and disadvantages. Let’s compare them:
| Aspect | Worm Gearbox | Helical Gearbox |
| Efficiency | Lower efficiency due to sliding friction between the worm and worm wheel. | Higher efficiency due to rolling contact between helical gear teeth. |
| Torque Transmission | Excellent torque transmission and high reduction ratios achievable in a single stage. | Good torque transmission, but may require multiple stages for high reduction ratios. |
| Noise and Vibration | Generally higher noise and vibration levels due to sliding action. | Lower noise and vibration levels due to smoother rolling contact. |
| Backlash | Higher inherent backlash due to the design. | Lower backlash due to meshing of helical teeth. |
| Efficiency at Higher Speeds | Less suitable for high-speed applications due to efficiency loss. | More suitable for high-speed applications due to higher efficiency. |
| Overload Protection | Natural self-locking feature provides some overload protection. | May not have the same level of inherent overload protection. |
| Applications | Commonly used for applications requiring high reduction ratios, such as conveyor systems and heavy-duty machinery. | Widely used in various applications including automotive transmissions, industrial machinery, and more. |
Both worm and helical gearboxes have their place in engineering, and the choice between them depends on the specific requirements of the application. Worm gearboxes are preferred for applications with high reduction ratios, while helical gearboxes are chosen for their higher efficiency and smoother operation.
Lubrication Requirements for a Worm Gearbox
Lubrication is crucial for maintaining the performance and longevity of a worm gearbox. Here are the key considerations for lubricating a worm gearbox:
- Type of Lubricant: Use a high-quality, high-viscosity lubricant specifically designed for worm gearboxes. Worm gearboxes require lubricants with additives that provide proper lubrication and prevent wear.
- Lubrication Interval: Follow the manufacturer’s recommendations for lubrication intervals. Regularly check the gearbox’s temperature and oil condition to determine the optimal frequency of lubrication.
- Oil Level: Maintain the proper oil level to ensure effective lubrication. Too little oil can lead to insufficient lubrication, while too much oil can cause overheating and foaming.
- Lubrication Points: Identify all the lubrication points on the gearbox, including the worm and wheel gear surfaces. Apply the lubricant evenly to ensure complete coverage.
- Temperature: Consider the operating temperature of the gearbox. Some lubricants have temperature limits, and extreme temperatures can affect lubricant viscosity and performance.
- Cleanliness: Keep the gearbox and the surrounding area clean to prevent contaminants from entering the lubricant. Use proper filtration and seals to maintain a clean environment.
- Monitoring: Regularly monitor the gearbox’s temperature, noise level, and vibration to detect any signs of inadequate lubrication or other issues.
Proper lubrication will reduce friction, wear, and heat generation, ensuring smooth and efficient operation of the worm gearbox. Always refer to the manufacturer’s guidelines for lubrication specifications and intervals.
editor by CX 2024-04-11
China wholesaler Right-Angle Worm Gearbox gearbox engine
Product Description
RV series Characteristics
- RV – Sizes:–150
- Input Options: with input shaft, With Square flange,With Input Flange
- Input Power 0.06 to 11 kW
- RV-Size from 030 to 105 in die-cast aluminium alloy budy and over 110 in cast iron
- Ratios between 5 and 100
- Max torque 1550 N.m and admissible output radial loads max 8771 N
- Aluminium units are supplied complete with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity
- Worm wheel: Copper (KK Cu).
- Loading capacity in accordance with: ISO 9001:2015/GB/T 19001-2016
- Size 030 and over are painted with RAL 5571 blue
- Worm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRVpower+NMRV, JWB+NMRV
- NMRV, NRV+VS,NMRV+AS,NMRV+VS,NMRV+F
- Options: torque arm, output flange, viton oil seals, low/high temperature oil, filling/drain/breather/level plug,Small gap
Basic models can be applied to a wide range of power reduction ratios from 5 to 1000.
Warranty: One year from date of delivery.
| WORM GEARBOX | |||||
| SNW SERIES | Output Speed Range: | ||||
| Type | Old Type | Output Torque | Output Shaft Dia. | 14rpm-280rpm | |
| SNW030 | RV030 | 21N.m | φ14 | Applicable Motor Power: | |
| SNW040 | RV040 | 45N.m | φ19 | 0.06kW-11kW | |
| SNW050 | RV050 | 84N.m | φ25 | Input Options1: | |
| SNW063 | RV063 | 160N.m | φ25 | With Inline AC Motor | |
| SNW075 | RV075 | 230N.m | φ28 | Input Options2: | |
| SNW090 | RV090 | 410N.m | φ35 | With Square flange | |
| SNW105 | RV105 | 630N.m | φ42 | Input Options3: | |
| SNW110 | RV110 | 725N.m | φ42 | With Input Shaft | |
| SNW130 | RV130 | 1050N.m | φ45 | Input Options4: | |
| SNW150 | RV150 | 1550N.m | φ50 | With Input Flange |
Starshine Drive
ZheJiang CHINAMFG Drive Co.,Ltd,the predecessor was a state-owned military mould enterprise, was established in 1965. CHINAMFG specializes in the complete power transmission solution for high-end equipment manufacturing industries based on the aim of “Platform Product, Application Design and Professional Service”.
Starshine have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.
Our Team
Quality Control
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures
to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend;
found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of
customer expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product
is a product inspection to determine the qualified products.
Packing
Delivery
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Function: | Speed Reduction |
| Layout: | Corner |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
| Customization: |
Available
| Customized Request |
|---|
Can a Worm Gearbox be Used for High-Speed Applications?
Worm gearboxes are generally not recommended for high-speed applications due to their inherent design characteristics. Here’s why:
- Efficiency: Worm gearboxes tend to have lower efficiency compared to other gearbox types, which means they can generate more heat and experience more energy loss at high speeds.
- Heat Generation: The sliding contact between the worm and worm wheel in a worm gearbox can lead to significant friction and heat generation, especially at high speeds. This heat can cause thermal expansion, affecting the gearbox’s performance and longevity.
- Wear and Noise: High speeds can exacerbate wear and noise issues in worm gearboxes. Increased friction and wear can lead to faster degradation of components, resulting in reduced lifespan and increased maintenance needs.
- Backlash: Worm gearboxes may have higher backlash compared to other gearbox types, which can impact precision and accuracy in high-speed applications.
While worm gearboxes are more commonly used in applications requiring high torque and moderate speeds, they may not be the best choice for high-speed scenarios. If high-speed operation is a requirement, other gearbox types such as helical, spur, or planetary gearboxes are often better suited due to their higher efficiency, lower heat generation, and reduced wear at elevated speeds.
Energy Efficiency of a Worm Gearbox: What to Expect
The energy efficiency of a worm gearbox is an important factor to consider when evaluating its performance. Here’s what you can expect in terms of energy efficiency:
- Typical Efficiency Range: Worm gearboxes are known for their compact size and high gear reduction capabilities, but they can exhibit lower energy efficiency compared to other types of gearboxes. The efficiency of a worm gearbox typically falls in the range of 50% to 90%, depending on various factors such as design, manufacturing quality, lubrication, and load conditions.
- Inherent Losses: Worm gearboxes inherently involve sliding contact between the worm and worm wheel. This sliding contact generates friction, leading to energy losses in the form of heat. The sliding action also contributes to lower efficiency when compared to gearboxes with rolling contact.
- Helical-Worm Design: Some manufacturers offer helical-worm gearbox designs that combine elements of helical and worm gearing. These designs aim to improve efficiency by incorporating helical gears in the reduction stage, which can lead to higher efficiency compared to traditional worm gearboxes.
- Lubrication: Proper lubrication plays a significant role in minimizing friction and improving energy efficiency. Using high-quality lubricants and ensuring the gearbox is adequately lubricated can help reduce losses due to friction.
- Application Considerations: While worm gearboxes might have lower energy efficiency compared to other types of gearboxes, they still offer advantages in terms of compactness, high torque transmission, and simplicity. Therefore, the decision to use a worm gearbox should consider the specific requirements of the application, including the trade-off between energy efficiency and other performance factors.
When selecting a worm gearbox, it’s essential to consider the trade-offs between energy efficiency, torque transmission, gearbox size, and the specific needs of the application. Regular maintenance, proper lubrication, and selecting a well-designed gearbox can contribute to achieving the best possible energy efficiency within the limitations of worm gearbox technology.
What is a Worm Gearbox and How Does It Work?
A worm gearbox, also known as a worm gear reducer, is a mechanical device used to transmit rotational motion and torque between non-parallel shafts. It consists of a worm screw and a worm wheel, both of which have helical teeth. The worm screw resembles a threaded cylinder, while the worm wheel is a gear with teeth that mesh with the worm screw.
The working principle of a worm gearbox involves the interaction between the worm screw and the worm wheel. When the worm screw is rotated, its helical teeth engage with the teeth of the worm wheel. As the worm screw rotates, it translates the rotational motion into a perpendicular motion, causing the worm wheel to rotate. This perpendicular motion allows the worm gearbox to achieve a high gear reduction ratio, making it suitable for applications that require significant speed reduction.
One of the key features of a worm gearbox is its ability to provide a high gear reduction ratio in a compact design. However, due to the sliding nature of the meshing teeth, worm gearboxes may exhibit higher friction and lower efficiency compared to other types of gearboxes. Therefore, they are often used in applications where efficiency is not the primary concern but where high torque and speed reduction are essential, such as conveyor systems, elevators, automotive steering systems, and certain industrial machinery.
editor by CX 2024-03-14
China OEM Wpx Wpo Worm Gear Motor Reducer Gearbox for Mixer gearbox engine
Product Description
Industry Machine Part Aluminum Alloy WP Series Worm Speed Reduction Gearbox
Specification
Detailed Pictures
About Greensky Power
HISTORY: Greensky is a mechanical brand of CHINAMFG Power Co., Ltd. With over 10 years’
mechanical manufacturing experiences, CHINAMFG Power always strictly stands on the
principle of Best Customer Satisfaction.
QUALITY: Material Inspection, Production Control, Finished Goods Test, Pre-dellivery Inspection
MISSION: “Once and forever” is our goal to serve customers in the world. Once we do
business with customer, we will do business forever.
MARKET: 30 different countries, mainly Germany, Austria, Japan, USA and Middle-East.
DELIVERY: 100% on-time delivery Guaranteed.
SERVICES: Fast response in English, German, Japanese and Chinese languages.
OEM: Customized orders are welcome at CHINAMFG Power.
Exhibitions
Certificates
FAQ
1 Q: What’s your MOQ for Worm Gearbox Speed Reducer?
A: 1unit is ok for different types.
2 Q: What about your warranty for your Worm GearboxSpeed Reducer?
A: One year.
3 Q: Do you provide OEM service with customer-logo?
A: Yes, we could do OEM orders, but we mainly focus on our own brand.
4 Q: How about your payment terms ?
A: TT, western union and paypal. 100% payment in advanced for orders less $5,000. 30% deposit and balance before delivery for orders over $5,000.
5 Q: How about your packing ?
A: Carton, Plywood case. If you need more, we can pack all goods with pallet
6 Q: What information should be given, if I buy Worm Gearbox Speed Reducer from you ?
A: Rated power, gearbox ratio, input speed, mounting position. More details, better!
7 Q: How do you deliver the Worm Gearbox Speed Reducer?
A: We will compare and choose the most suitable ways of delivery by sea, air or express courier.
We hope you will enjoy cooperating with us.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Function: | Change Drive Torque, Speed Reduction |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
| Customization: |
Available
| Customized Request |
|---|
Can a Worm Gearbox be Used for High-Speed Applications?
Worm gearboxes are generally not recommended for high-speed applications due to their inherent design characteristics. Here’s why:
- Efficiency: Worm gearboxes tend to have lower efficiency compared to other gearbox types, which means they can generate more heat and experience more energy loss at high speeds.
- Heat Generation: The sliding contact between the worm and worm wheel in a worm gearbox can lead to significant friction and heat generation, especially at high speeds. This heat can cause thermal expansion, affecting the gearbox’s performance and longevity.
- Wear and Noise: High speeds can exacerbate wear and noise issues in worm gearboxes. Increased friction and wear can lead to faster degradation of components, resulting in reduced lifespan and increased maintenance needs.
- Backlash: Worm gearboxes may have higher backlash compared to other gearbox types, which can impact precision and accuracy in high-speed applications.
While worm gearboxes are more commonly used in applications requiring high torque and moderate speeds, they may not be the best choice for high-speed scenarios. If high-speed operation is a requirement, other gearbox types such as helical, spur, or planetary gearboxes are often better suited due to their higher efficiency, lower heat generation, and reduced wear at elevated speeds.
Materials Used for Worm Gears
Worm gears are manufactured using a variety of materials to meet different application requirements. Some commonly used materials for worm gears include:
- Steel: Steel is a popular choice for worm gears due to its strength, durability, and wear resistance. It can handle heavy loads and is often used in industrial applications.
- Bronze: Bronze offers good lubricity and is commonly used for the worm gear (worm) component. It provides effective wear resistance and works well in applications where quiet operation is essential.
- Cast Iron: Cast iron is known for its high strength and durability. It’s often used for worm gears in applications where shock loads or heavy-duty conditions are expected.
- Aluminum: Aluminum worm gears are lightweight and corrosion-resistant, making them suitable for applications where weight reduction is important.
- Plastic: Some worm gears are made from plastic materials such as nylon or acetal. These materials are often chosen for their self-lubricating properties and quiet operation.
- Composite Materials: Composite materials can offer a combination of properties, such as lightweight construction and corrosion resistance. They can be suitable for specific applications.
The choice of material depends on factors such as the application’s load, speed, operating environment, and required performance characteristics. It’s important to consider these factors when selecting the appropriate material for worm gears to ensure optimal performance and longevity.
Advantages of Using a Worm Reducer in Mechanical Systems
Worm reducers offer several advantages that make them suitable for various mechanical systems:
- High Gear Reduction Ratio: Worm gearboxes provide significant speed reduction, making them ideal for applications that require a high gear reduction ratio without the need for multiple gears.
- Compact Design: Worm reducers have a compact and space-saving design, allowing them to be used in applications with limited space.
- Self-Locking: Worm gearboxes exhibit self-locking properties, which means that the worm screw can prevent the worm wheel from reversing its motion. This is beneficial for applications where the gearbox needs to hold a load in place without external braking mechanisms.
- Smooth and Quiet Operation: Worm gearboxes operate with a sliding motion between the teeth, resulting in smoother and quieter operation compared to some other types of gearboxes.
- High Torque Transmission: Worm gearboxes can transmit high torque levels, making them suitable for applications that require powerful torque output.
- Heat Dissipation: The sliding action between the worm screw and the worm wheel contributes to heat dissipation, which can be advantageous in applications that generate heat during operation.
- Stable Performance: Worm reducers offer stable and reliable performance, making them suitable for continuous operation in various industrial and mechanical systems.
Despite these advantages, it’s important to note that worm gearboxes also have limitations, such as lower efficiency compared to other gear types due to the sliding motion and potential for higher heat generation. Therefore, selecting the appropriate type of gearbox depends on the specific requirements and constraints of the application.
editor by CX 2024-02-28
China best Right Angle Telescope Worm Gear Speed Reducer S Saf67 Worm Gear Box Motor Reducer 90 Degree Gearbox gearbox engine
Product Description
Product Parameters
Features of S series reducer
The same model can be equipped with motors of various powers. It is easy to realize the combination and connection between various models.
The transmission efficiency is high, and the single reducer efficiency is up to 96%. three
The transmission ratio is subdivided and the range is wide. The combined model can form a large transmission ratio and low output speed.
The installation forms are various, and can be installed with any foot, B5 flange or B4 flange. The foot mounting reducer has 2 machined foot mounting planes.
Helical gear and worm gear combination, compact structure, large reduction ratio.
Installation mode: foot installation, hollow shaft installation, flange installation, torque arm installation, small flange installation.
Input mode: motor direct connection, motor belt connection or input shaft, connection flange input.
Average efficiency: reduction ratio 7.5-69.39 is 77%; 70.43-288 is 62%; The S/R combination is 57%.
Detailed Photos
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Hardness: | Hardened Tooth Surface |
|---|---|
| Installation: | 90 Degree |
| Layout: | Expansion |
| Gear Shape: | Bevel Gear |
| Step: | Single-Step |
| Type: | Gear Reducer |
| Samples: |
US$ 150/Piece
1 Piece(Min.Order) | |
|---|
Can a Worm Gearbox be Used for High-Speed Applications?
Worm gearboxes are generally not recommended for high-speed applications due to their inherent design characteristics. Here’s why:
- Efficiency: Worm gearboxes tend to have lower efficiency compared to other gearbox types, which means they can generate more heat and experience more energy loss at high speeds.
- Heat Generation: The sliding contact between the worm and worm wheel in a worm gearbox can lead to significant friction and heat generation, especially at high speeds. This heat can cause thermal expansion, affecting the gearbox’s performance and longevity.
- Wear and Noise: High speeds can exacerbate wear and noise issues in worm gearboxes. Increased friction and wear can lead to faster degradation of components, resulting in reduced lifespan and increased maintenance needs.
- Backlash: Worm gearboxes may have higher backlash compared to other gearbox types, which can impact precision and accuracy in high-speed applications.
While worm gearboxes are more commonly used in applications requiring high torque and moderate speeds, they may not be the best choice for high-speed scenarios. If high-speed operation is a requirement, other gearbox types such as helical, spur, or planetary gearboxes are often better suited due to their higher efficiency, lower heat generation, and reduced wear at elevated speeds.
How to Calculate the Efficiency of a Worm Gearbox
Calculating the efficiency of a worm gearbox involves determining the ratio of output power to input power. Efficiency is a measure of how well the gearbox converts input power into useful output power without losses. Here’s how to calculate it:
- Step 1: Measure Input Power: Measure the input power (Pin) using a power meter or other suitable measuring equipment.
- Step 2: Measure Output Power: Measure the output power (Pout) that the gearbox is delivering to the load.
- Step 3: Calculate Efficiency: Calculate the efficiency (η) using the formula: Efficiency (η) = (Output Power / Input Power) * 100%
For example, if the input power is 1000 watts and the output power is 850 watts, the efficiency would be (850 / 1000) * 100% = 85%.
It’s important to note that efficiencies can vary based on factors such as gear design, lubrication, wear, and load conditions. The calculated efficiency provides insight into how effectively the gearbox is converting power, but it’s always a good practice to refer to manufacturer specifications for gearbox efficiency ratings.
Can a Worm Gearbox Provide High Torque Output?
Yes, a worm gearbox is capable of providing high torque output due to its unique design and principle of operation. Worm gears are known for their high torque multiplication capabilities, making them suitable for applications that require significant torque transfer.
The torque output of a worm gearbox is influenced by several factors:
- Lead Angle: The lead angle of the worm affects the mechanical advantage of the gear system. A larger lead angle can result in higher torque output.
- Worm Diameter: A larger diameter worm can offer increased torque output as it provides more contact area with the gear.
- Gear Ratio: The gear ratio between the worm and the gear determines the torque multiplication factor. A higher gear ratio leads to higher torque output.
- Lubrication: Proper lubrication is essential to minimize friction and ensure efficient torque transmission.
- Material and Quality: High-quality materials and precision manufacturing contribute to the gearbox’s ability to handle high torque loads.
Due to their ability to provide high torque output in a compact form factor, worm gearboxes are commonly used in various industrial applications, including heavy machinery, construction equipment, conveyor systems, and more.
editor by CX 2024-02-27
China Hot selling Stainless Steel Worm Speed Reducer Industrial Transmission Box Food Processing Machine Gearbox gearbox engine
Product Description
Stainless Steel Worm Speed Reducer Industrial Transmission Box Food Processing Machine Gearbox
Features
1. Light in weight and non-rusting
2. Smooth in running, can work a long time in dreadful conditions
3. High efficiency, low noise
4. Good-looking in appearance, durable in service life, and small in volume
Product Photos
Product Description
| Model | 030 ~ 063 |
| Power | 0.06kw ~ 4kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/5 ~ 1/100 |
| Input motor | AC (1 phase or 3 phase) / DC / BLDC / Stepper / Servo |
| Output shaft | Solid shaft / Hollow shaft / Output flange… |
| Dimension standard | Metric size / Inch size |
| Material of housing | die-cast aluminum / Cast iron / Stainless steel |
| Accessories | Flange / CHINAMFG shaft / Torque arm / Cover … |
Related Products
FAQ
Q: Can you make the gearbox with customization?
A: Yes, we can customize per your request, like flange, shaft, configuration, material, etc.
Q: Do you provide samples?
A: Yes. A sample is available for testing.
Q: What is your MOQ?
A: It is 10pcs for the beginning of our business.
Q: What’s your lead time?
A: Standard products need 5-30 days, a bit longer for customized products.
Q: Do you provide technology support?
A: Yes. Our company have a design and development team, we can provide technology support if you
need.
Q: How do you ship to us?
A: It is available by air, sea, or train.
Q: How do I pay the money?
A: T/T and L/C are preferred, with different currencies, including USD, EUR, RMB, etc.
Q: How can I know if the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.
Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.
Q: How shall we contact you?
A: You can send an inquiry directly, and we will respond within 24 hours.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Machinery |
|---|---|
| Function: | Change Drive Torque, Speed Reduction |
| Layout: | Right Angle |
| Samples: |
US$ 200/Piece
1 Piece(Min.Order) | Order Sample Stainless steel
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How to Install and Align a Worm Reducer Properly
Proper installation and alignment of a worm reducer are crucial for ensuring optimal performance and longevity. Follow these steps to install and align a worm reducer:
- Preparation: Gather all the necessary tools, equipment, and safety gear before starting the installation process.
- Positioning: Place the worm reducer in the desired location, ensuring that it is securely mounted to a stable surface. Use appropriate fasteners and mounting brackets as needed.
- Shaft Alignment: Check the alignment of the input and output shafts. Use precision measurement tools to ensure that the shafts are parallel and in line with each other.
- Base Plate Alignment: Align the base plate of the reducer with the foundation or mounting surface. Ensure that the base plate is level and properly aligned before securing it in place.
- Bolt Tightening: Gradually and evenly tighten the mounting bolts to the manufacturer’s specifications. This helps ensure proper contact between the reducer and the mounting surface.
- Check for Clearance: Verify that there is enough clearance for any rotating components or parts that may move during operation. Avoid any interference that could cause damage or performance issues.
- Lubrication: Apply the recommended lubricant to the worm reducer according to the manufacturer’s guidelines. Proper lubrication is essential for smooth operation and reducing friction.
- Alignment Testing: After installation, run the worm reducer briefly without a load to check for any unusual noises, vibrations, or misalignment issues.
- Load Testing: Gradually introduce the intended load to the worm reducer and monitor its performance. Ensure that the reducer operates smoothly and efficiently under the load conditions.
It’s important to refer to the manufacturer’s installation guidelines and specifications for your specific worm reducer model. Proper installation and alignment will contribute to the gearbox’s reliability, efficiency, and overall functionality.
Worm Gearbox Applications in Robotics and Automation
Worm gearboxes play a crucial role in various robotics and automation applications due to their unique characteristics and benefits. Here are some common applications where worm gearboxes are used:
- Robotic Arm Movement: Worm gearboxes are employed in robotic arms to provide precise and controlled movement. The self-locking property of worm gearboxes helps maintain the arm’s position without requiring additional brakes.
- Conveyor Systems: In automated production lines, worm gearboxes are used to drive conveyor belts and move materials or products along assembly lines with accuracy.
- Precision Positioning: Worm gearboxes are used in precision positioning systems, such as those found in pick-and-place robots and CNC machines. They ensure accurate and repeatable movements.
- Pan and Tilt Mechanisms: Worm gearboxes are utilized in pan and tilt mechanisms of surveillance cameras, robotic cameras, and sensors. The self-locking feature helps stabilize and maintain the desired angle.
- Automated Gates and Doors: Worm gearboxes are used in automated gate and door systems to control their opening and closing movements smoothly and safely.
- Material Handling: Robots in warehouses and distribution centers use worm gearboxes to manipulate and lift objects, enhancing efficiency in material handling.
- Medical Robotics: Worm gearboxes are employed in medical robots for surgical procedures, diagnostic equipment, and rehabilitation devices, ensuring precise and controlled movements.
- Industrial Robots: Industrial robots rely on worm gearboxes for various tasks, including welding, painting, assembly, and packaging, where precise movements are essential.
- Automated Testing Equipment: In testing and inspection applications, worm gearboxes provide the necessary movement and positioning for accurate testing and measurements.
- Food and Beverage Industry: Worm gearboxes are used in automated food processing and packaging systems, ensuring hygienic and precise movement of products.
Worm gearboxes are preferred in these applications due to their compact size, high torque output, self-locking feature, and ability to provide a right-angle drive. However, selecting the right gearbox requires considering factors such as load, speed, efficiency, and environmental conditions.
Can a Worm Gearbox Provide High Torque Output?
Yes, a worm gearbox is capable of providing high torque output due to its unique design and principle of operation. Worm gears are known for their high torque multiplication capabilities, making them suitable for applications that require significant torque transfer.
The torque output of a worm gearbox is influenced by several factors:
- Lead Angle: The lead angle of the worm affects the mechanical advantage of the gear system. A larger lead angle can result in higher torque output.
- Worm Diameter: A larger diameter worm can offer increased torque output as it provides more contact area with the gear.
- Gear Ratio: The gear ratio between the worm and the gear determines the torque multiplication factor. A higher gear ratio leads to higher torque output.
- Lubrication: Proper lubrication is essential to minimize friction and ensure efficient torque transmission.
- Material and Quality: High-quality materials and precision manufacturing contribute to the gearbox’s ability to handle high torque loads.
Due to their ability to provide high torque output in a compact form factor, worm gearboxes are commonly used in various industrial applications, including heavy machinery, construction equipment, conveyor systems, and more.
editor by CX 2024-02-22
China Good quality Nmrv Worm Gearbox for Compactors gearbox engine
Product Description
Features
1.Wide transmission rate, strong output torque
2.Compact mechanical structure, light weight, small volume&Good heat-dissipating
3.Smooth operation with lower noise or vibration
4.Easy mounting, free linking, high efficiency
5. PERFECT SUBSTITUDE FOR MOTOVARIO AND CZPT PRODUCTS
Applications
Wide range of application,including light industry of food &beverage, Cement,
package,construction material,chemicals and etc.
Technical data:
| Model | RV 130 150 |
| Single unit versions | NMRV – fitted for motor flanged coupling, NRV – with input shaft, NMRV-E motor flanged coupling with worm extension shaft, NRV-E with double extension worm shaft, |
| Power | 0.06—-15KW |
| Single unit reduction ratio | 1:5 7.5 80 100 |
| Output torque | 2.6—1195N.M |
| Worm shaft material | 20CrMnTi with carburizing and quenching.The hardness of surface is 56-62HRC with carbonized layer 0.5-0.8mm |
| Worm wheel material | worm mandrel is HT250,and worm ring gear,ZQSn10-1,hardness is 60HRC |
After-sale service:
One year warranty,subject to proper operation and installation;free technical support all the time.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Application: | Motor |
|---|---|
| Hardness: | Hardened |
| Type: | Worm and Wormwheel |
| Samples: |
US$ 30/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
Self-Locking Properties in a Worm Gearbox
Yes, worm gearboxes exhibit self-locking properties, which can be advantageous in certain applications. Self-locking refers to the ability of a mechanism to prevent the transmission of motion from the output shaft back to the input shaft when the system is at rest. Worm gearboxes inherently possess self-locking properties due to the unique design of the worm gear and worm wheel.
The self-locking behavior arises from the angle of the helix on the worm shaft. In a properly designed worm gearbox, the helix angle of the worm is such that it creates a mechanical advantage that resists reverse motion. When the gearbox is not actively driven, the friction between the worm threads and the worm wheel teeth creates a locking effect.
This self-locking feature makes worm gearboxes particularly useful in applications where holding a load in position without external power is necessary. For instance, they are commonly used in situations where there’s a need to prevent a mechanism from backdriving, such as in conveyor systems, hoists, and jacks.
However, it’s important to note that while self-locking properties can be beneficial, they also introduce some challenges. The high friction between the worm gear and worm wheel during self-locking can lead to higher wear and heat generation. Additionally, the self-locking effect can reduce the efficiency of the gearbox when it’s actively transmitting motion.
When considering the use of a worm gearbox for a specific application, it’s crucial to carefully analyze the balance between self-locking capabilities and other performance factors to ensure optimal operation.
How to Calculate the Input and Output Speeds of a Worm Gearbox?
Calculating the input and output speeds of a worm gearbox involves understanding the gear ratio and the principles of gear reduction. Here’s how you can calculate these speeds:
- Input Speed: The input speed (N1) is the speed of the driving gear, which is the worm gear in this case. It is usually provided by the manufacturer or can be measured directly.
- Output Speed: The output speed (N2) is the speed of the driven gear, which is the worm wheel. To calculate the output speed, use the formula:
N2 = N1 / (Z1 * i)
Where:
N2 = Output speed (rpm)
N1 = Input speed (rpm)
Z1 = Number of teeth on the worm gear
i = Gear ratio (ratio of the number of teeth on the worm gear to the number of threads on the worm)
It’s important to note that worm gearboxes are designed for gear reduction, which means that the output speed is lower than the input speed. Additionally, the efficiency of the gearbox, friction, and other factors can affect the actual output speed. Calculating the input and output speeds is crucial for understanding the performance and capabilities of the worm gearbox in a specific application.
Can a Worm Gearbox Provide High Torque Output?
Yes, a worm gearbox is capable of providing high torque output due to its unique design and principle of operation. Worm gears are known for their high torque multiplication capabilities, making them suitable for applications that require significant torque transfer.
The torque output of a worm gearbox is influenced by several factors:
- Lead Angle: The lead angle of the worm affects the mechanical advantage of the gear system. A larger lead angle can result in higher torque output.
- Worm Diameter: A larger diameter worm can offer increased torque output as it provides more contact area with the gear.
- Gear Ratio: The gear ratio between the worm and the gear determines the torque multiplication factor. A higher gear ratio leads to higher torque output.
- Lubrication: Proper lubrication is essential to minimize friction and ensure efficient torque transmission.
- Material and Quality: High-quality materials and precision manufacturing contribute to the gearbox’s ability to handle high torque loads.
Due to their ability to provide high torque output in a compact form factor, worm gearboxes are commonly used in various industrial applications, including heavy machinery, construction equipment, conveyor systems, and more.
editor by CX 2023-09-05
in Mandalay Myanmar sales price shop near me near me shop factory supplier High Precision Small Planetary Gearbox Engine Gearbox Reduction Gear Reducer for Customized Machine Gear Box manufacturer best Cost Custom Cheap wholesaler
Retaining in thoughts that good provider is the crucial to cooperating with clientele, we strive to fulfill substantial high quality expectations, provide aggressive prices and ensure prompt delivery. We can provide a entire-range of energy transmission items like chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks. Each approach, every part, every single function in EPG is demanded to be carried out 1 phase subsequent one more, very carefully and cautiously, from materials choice, reformation to production accessories, from factors warmth treatment to automatic assembly, from quality management to solution inspection and tests and from buy working to after revenue services. We supply OEM metallic planetary EPTT for electornic motor, EPTT EPTTry through PowEPTTmetallurgy and PowEPTTmetallurgy process .
Tiny planetary EPTT box can be equipped with stepping motor , brushless motor , AC motor , DC motor , .
Ratio : 3, 4, five, 7, nine, ten, 15, 20, twenty five, thirty, 35, 40, 50, sixty four, 70, eighty, 100, 150, 200, 250, 350, four hundred, 500, seven hundred, a thousand .
PowEPTTmetallurgy (PM) is a expression masking a wide variety of waEPTTin which supplies or parts are produced from metal powders. PM procedures can steer clear of, or significantly reduce, the want to use metallic removing procedures, thereby dramatically reducing produce losses in manufacture and usually resulting in reduce EPTTs.
The powEPTTmetallurgy push and sinter method EPTTly is composed of 3 basic methods: powEPTTblending (pulverisation), die compaction, and sintering. Compaction is EPTTly done at room temperature, and the elevated-temperature procedure of sintering is usually performed at atmospheric pressure and unEPTTcarefully managed ambiance composition. Optional secondary processing this sort of as coining or warmth remedy often follows to receive EPTT properties or improved precision.
Customized metallic elements specification
| Merchandise title | Sintering metal parts carbon steel micro EPTT EPTT for motors planetary EPTT reduction EPTT transfer |
| material | steel , carton steel , stainless steel |
| procedure | EPTT EPTT molding , PowEPTTmetallurgy ,CNC EPTTry |
| Surface therapy | PoEPTTng , plating ,sand blasting , PVD , coating |
| Tolerance | plusmn0.3% |
| Drawing structure | DWG ,IGS , STP |
| Shipping time | 30 daEPTTfor mass generation |
PM Procedure has a high degree of fleXiHu (West Lake) Dis.bility making it possible for the tailoring of the bodily qualities of a item to go well with your specific residence and functionality needs. These incEPTT:
- Structural pieces with sophisticated styles
- Managed Porosity
- Controlled performance
- Great functionality in anxiety and absorbing of vibrations
- EPTT qualities this kind of as hardness and wear resistance
- Wonderful precision and excellent area complete
- Big series of items with nEPTT tolerances
Cuatom micro EPTT
Workshop
in Aden Yemen sales price shop near me near me shop factory supplier Right Angle Gearbox 1planet Gearbox Small Motor Transmission Shaft Mounted Speed Reducer Gearbox Transmission Small Engine Transmission manufacturer best Cost Custom Cheap wholesaler
We are aiming to meet up with the demands of the consumers close to the globe.. “We are often serving our customers with our ideal merchandise.” Advanced thermo treatment method products, this kind of as community warmth therapy oven, multi-use thermo treatment oven, and so forth.
rigEPTT angle EPTT 1planet EPTT tiny motor EPTT shaft mounted pace EPTT EPTT EPTT small motor EPTT
EPTT features:
1. Substantial performance and conserve EPTT.
2. Vast velocity ranges and higher torque.
three. Multi-framework, numerous assembling strategies.
4. Large loading assistance, stable transmitting and low noise amount.
5. Outstanding sealing, extensive range of business software.
6. It adopts a variety of cooling and lubricating
| HB EPTT Equipment EPTT | |
| Variety | Helical pXiHu (West Lake) Dis.Hu (West Lake) Dis.lel shaft sort, EPTTl-helical appropriate-angle sort |
| Design | H1/B1~H26/B26 |
| Enter EPTT | 3 ~ 5000 KW |
| Input speed | 750rpm ~ 1500rpm |
| Reduction ratio | one/one.25 ~ 1/450 |
| Output torque | 3 ~ 900kN.m |
| Set up type | Foot / Reliable shaft / Hollow shaft / Output flange #8230 |
| Efficiency | Single-stage 98%, two-stage ninety six%, three-stage 94%, 4-stage ninety two% |
| Equipment | Back quit / Cooling admirer / Cooling coil / Oil pump / Compensation tank #8230 |
Standard Software
#9830 Coal mining
#9830 EPTT Plant EPTT
#9830 EPTTlurgical Industry
#9830 EPTT Forming EPTTry
#9830 Petrochemical Market
#9830 EPTT EPTT
#9830 EPTTing EPTTry
#9830 Cement and development Industry
#9830 EPTT Safety Market
#9830 Cable Industry
#9830 Chemical sector
#9830 Meals EPTTry
Models
Horizontal:
PXiHu (West Lake) Dis.Hu (West Lake) Dis.lel shaft EPTT device box
H1SH1, H1SH3, H1SH5, H1SH7, H1SH9, H1SH11, H1SH13, H1SH15, H1SH17, H1SH19
H2SH, H2HH, H2DH, H2KH, H2FH, H3SH, H3HH, H3DH, H3HM, H3DM, H4SH, H4HH, H4DH, H4HM, H4DM
EPTTl helical rigEPTT angle EPTT device
B2SH, B2HH, B2DH, B2HM, B2DM, B3SH, B3HH, B3DH, B3HM, B3DM, B4SH, B4HH, B4DH, B4HM, B4DM
Vertical:
PXiHu (West Lake) Dis.Hu (West Lake) Dis.lel shaft EPTT unit box
H2SV, H2HV, H2DV, H3SV, H3DV, H4SV, H4HV, H4DV, H4KV, H4FV
EPTTl helical rigEPTT angle EPTT unit
B2SV, B2HV, B2DV, B3SV, B3HV, B3DV, B4SV, B4HV, B4DV, B4KV, B4FV
Business data
EstabEPTTd in 1985, EPTT EPTT EPTTRY CO., LTD is a large and new EPTT EPTTrprise partaking in research, deveXiHu (West Lake) Dis.Hu (West Lake) Dis. and manufacture for EPTT amp velocity variator, one particular of the director member of EPTT EPTT Association of EPTT EPTT EPTTry.
It handles far more than 40,000 sq. meters, has far more than four hundred staff , twenty% of whom are experts, geared up with much more than three hundred sets the most EPTT correct numerical manage gear, incXiHu (West Lake) Dis.Hu (West Lake) Dis. German HOFLER forming EPTT grinding EPTT to enhance high quality.
established up more than 30 countrywide income branches to provide our clients in time and thoroughly.
Our goods also exported to a lot more than 30 countries main in Europe, Asia The united states, and Africa, with substantial status.
EPTT manage
EPTT
Related EPTT kinds
| EPTT Planetary EPTT | Robot RV EPTT pace EPTT |
| Personalized made Non-stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPTT | UDL Sequence Variator |
| PYZ Series Helical Tooth Shaft Mounted EPTT | 8000 Sequence Cycloidal EPTT |
| SLT Series Spiral EPTTl EPTT | SLSWL Collection Worm Screw Jack |
| SLP Sequence Planetary EPTT | SLH/SLB Sequence Substantial EPTT EPTT |
| NMRV Series Worm EPTT | BKM Sequence Helical-hypoid EPTT |
| SLRC Sequence Helical EPTT | SLEPTR Collection Shaft Mounted EPTT |
| SLXG Series Shaft Mounted EPTT | X/B Series Cycloidal EPTT |
| SLR/SEPTT/SLK/SLS Collection Helical EPTT | AC/DC EPTT |
Main solution listing: 16 series incXiHu (West Lake) Dis.Hu (West Lake) Dis. SLR/SLS/SLK/SEPTT collection tough tooth flank EPTT EPTT , SLRC sequence aluminium case helical EPTT EPTTs,SLHSLB sequence large EPTT speed EPTT, SLP sequence planetary pace EPTT, X/B series cycloidal EPTT, SLXG collection shaft-mounted EPTT box, SLSWL sequence worm screw jack, SLT collection helical cone EPTT box, altogether far more than ten,000 ratios, different specification make us at the head of domestic EPTT business, extensively provide the mechanical EPTT field of ligEPTT amp weighty sector these kinds of as: beer amp EPTTrage, mining EPTT, meals EPTT, textile printing, rubber amp plastic content, petrochemical business, jack-up transportation, pharmacy amp approach hides, environmental protection tools.
Certification
FAQ
1.Payment Term: TT, L/C
two.Supply time: about thirty daEPTTfrom EPTT payment.
3.We take EPT items as per your EPTT requirement.
four.XiHu (West Lake) Dis.hu (West Lake) Dis.lines for the Choice:Usually we can select a single EPTT which is appropriate for you with some informations from you,these kinds of as ratio/motor pace/mounting dimension/ out torque and so on.
5.If the bare minimum orEPTTamount is in excessive of $10000, there are preferential.
Q1: What details must I explain to you to confirm the merchandise?
A:Product/Measurement, EPTT Ratio, Shaft instructions amp OrEPTTquantity.
Q2: What can i do if I never know which one EPTT?
A:Dont be concerned, Send out as much data as you can, our group will aid you find the rigEPTT one you are hunting for.
Q3: What is your merchandise warranty period of time?
A:We offer you one year guarantee given that the vessel departure day left EPTT.
This fall: Are you buying and selling organization or company ?
A: We are manufacturing unit.
Q5: How EPTT is your delivery time?
A: EPTTly it is five-10 daEPTTif the goods are in stock. or it is fifteen-20 daEPTTif the items are not in stock, it is according to quantity.
Q6: Do you provide samples ? is it cost-free or extra ?
A: Of course, we could offer you the sample for free of charge charge but do not pay out the EPTT of freight.
Q7: What is your phrases of payment ?
A: Payment lt=1000USD, a hundred% EPTT. Payment gt=1000USD, 30% T/T EPTT ,stability before shippment.
If you have another issue, pls come to feel cost-free to make contact with us as underneath:
Make contact with Us
in Srinagar India sales price shop near me near me shop factory supplier Hydraulic Marine Gearbox for Marine Engine Manual Transmission Gearbox for Escalator Handwheel Gearbox Small Boat Gearbox manufacturer best Cost Custom Cheap wholesaler
Our main goods are Needle Roller bearings, Cylindrical Roller Bearings, Rod end Bearings, Spherical simple bearings, Track roller Bearings for Guideway, Roller Bearings, Merge Bearings for forklifts, H2o Pump Bearings, SNR Vehicle Bearings and all varieties of Spherical Bearings. Sophisticated thermo therapy products, this kind of as network heat therapy oven, multi-use thermo remedy oven, and so forth. The group is centered on creating all selection of common roller chains and sprockets, gears & gearboxes, this sort of as conveyor chain & sprockets , stainless steel chain, agricultural chain and has not just offered its products all more than china, but also offered more than 65% items to oversees, such as Europe, The us, South-east Asia, and it also has set up storage logistics in locations like Europe.
Lower EPT NMRV collection worm EPT utilised marine EPT for sale,cheap worm EPT box prices for textile EPTs
Product Description
NMRV Employed Marine EPT
one. Mad of large-high quality EPT alloy,ligEPT weigEPT and non-rusting
2. Massive output torque
3. Sleek in working and minimal in sounds,can perform EPT time in dreadful conditions.
4. Higher in radiating performance.
five. Very good-seeking in visual appeal,tough in services daily life and tiny in volume.
6. Appropriate for omnibearing set up.
| Design No.: | NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150 |
| Ratio: | 5,seven.5,10,fifteen,20,25,thirty,40,50,sixty,80,a hundred |
| Color: | Blue(Ral5571)/Silver Gray (RAL9006) Or On Consumer Request |
| EPT: | EPT: Dimensions twenty five-110 Is EPT Alloy, Dimension one hundred ten-a hundred and fifty Is Solid-Iron |
| Worm Wheel: ZCuSn10Pb1 | |
| Worm:20Cr | |
| Pinion:Tin Bronze | |
| Output Shaft: Metal-45# | |
| Usages: | EPT EPT: Foodstuff Stuff, Ceramics, Chemical, EPT, Dyeing,EPT doing work, Glass. |
| IEC Flange: | IEC StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Flange Or On Client Ask for |
Firm Details
EPT handle
EPT
EPT Particulars: StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd carton/Pallet/StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd wooden situation
Shipping Details : 15-thirty functioning daEPTupon payment
Our Certifications
Associated Product
EPT Planetary EPT
| EPT Planetary EPT | Robotic RV EPT velocity EPT |
| Customized produced Non-stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPT | UDL Series Variator |
| PYZ Series Helical Tooth Shaft Mounted EPT | 8000 Sequence Cycloidal EPT |
| SLT Collection Spiral EPTl EPT | SLSWL Sequence Worm Screw Jack |
| SLP Sequence Planetary EPT | SLH/SLB Sequence High EPT EPT |
| NMRV Collection Worm EPT | BKM Series Helical-hypoid EPT |
| SLRC Sequence Helical EPT | SLSMR Collection Shaft Mounted EPT |
| SLXG Sequence Shaft Mounted EPT | X/B Collection Cycloidal EPT |
| SLR/SEPT/SLK/SLS Sequence Helical EPT | AC/DC EPT |
FAQ
1.Payment Term: TT, L/C
two.Shipping and delivery time: about thirty daEPTfrom EPT payment.
three.We acknowledge custom-made goods as for each your EPT prerequisite.
four.XiHu (West Lake) Dis.hu (West Lake) Dis.strains for the Assortment:Generally we can pick a single EPT which is suitable for you with some informations from you,this kind of as ratio/motor speed/mounting dimension/ out torque and so forth.
five.If the least orEPTamount is in excessive of $ten thousand, there are preferential.
Q1: What information must I notify you to confirm the solution?
A:Design/Dimensions, EPT Ratio, Shaft instructions amp OrEPTquantity.
Q2: What can i do if I will not know which 1 EPT?
A:Dont fret, Deliver as considerably info as you can, our team will support you locate the rigEPT one particular you are hunting for.
Q3: What is your item warranty time period?
A:We supply a single yr guarantee given that the vessel departure date remaining EPT.
Q4: Are you buying and selling business or maker ?
A: We are factory.
Q5: How EPT is your shipping time?
A: EPTly it is five-ten daEPTif the items are in inventory. or it is 15-20 daEPTif the goods are not in stock, it is according to amount.
Q6: Do you provide samples ? is it free or extra ?
A: Indeed, we could offer you the sample for free charge but do not spend the EPT of freight.
Q7: What is your conditions of payment ?
A: Payment lt=1000USD, 100% EPT. Payment gt=1000USD, thirty% T/T EPT ,stability ahead of shippment.
If you have an additional question, pls really feel totally free to speak to us as below:
Contact Us
in Tangerang Indonesia sales price shop near me near me shop factory supplier Right Angle Gearbox 1planet Gearbox Small Motor Transmission Shaft Mounted Speed Reducer Gearbox Transmission Small Engine Transmission manufacturer best Cost Custom Cheap wholesaler
There is a complex middle of province degree, EPG academician doing work station, experiment station for EPG put up doctors, and nationwide 863 software set up in EPG group. With these platforms and sturdy technical capacity, the more than 400 experts have developed all selection of particular large precise and substantial power goods, carried out mildew plans for important elements in the auto and countrywide sector revitalizing system, ensuing a lot more than 5000 designed above, among which 33 items are autonomous patent technological innovation with 4 patent accepted . EPG has established up a comprehensive set of top quality management system which is offered with superior inspection and test equipment. we source chromed bar and tubes for hydualic and pheumatic cylinders.
rigEPT angle EPT 1planet EPT tiny motor EPT shaft mounted velocity EPT EPT EPT small motor EPT
EPT attributes:
one. High efficiency and preserve EPT.
two. Wide speed ranges and large torque.
3. Multi-framework, different assembling techniques.
4. Large loading assist, secure transmitting and minimal sounds stage.
five. Superb sealing, vast variety of sector software.
six. It adopts numerous cooling and lubricating
| HB EPT Gear EPT | |
| Sort | Helical pXiHu (West Lake) Dis.Hu (West Lake) Dis.lel shaft kind, EPTl-helical right-angle sort |
| Product | H1/B1~H26/B26 |
| Input EPT | 3 ~ 5000 KW |
| Enter pace | 750rpm ~ 1500rpm |
| Reduction ratio | 1/1.25 ~ 1/450 |
| Output torque | three ~ 900kN.m |
| Set up sort | Foot / Solid shaft / Hollow shaft / Output flange #8230 |
| Effectiveness | Single-phase ninety eight%, two-phase ninety six%, 3-stage ninety four%, 4-stage 92% |
| Equipment | Again quit / Cooling supporter / Cooling coil / Oil pump / Payment tank #8230 |
Typical Software
#9830 Coal mining
#9830 EPT Plant EPT
#9830 EPTlurgical Business
#9830 EPT Forming EPTry
#9830 Petrochemical Market
#9830 EPT EPT
#9830 EPTing EPTry
#9830 Cement and construction Business
#9830 EPT Safety Sector
#9830 Cable Business
#9830 Chemical industry
#9830 Meals EPTry
Models
Horizontal:
PXiHu (West Lake) Dis.Hu (West Lake) Dis.lel shaft EPT unit box
H1SH1, H1SH3, H1SH5, H1SH7, H1SH9, H1SH11, H1SH13, H1SH15, H1SH17, H1SH19
H2SH, H2HH, H2DH, H2KH, H2FH, H3SH, H3HH, H3DH, H3HM, H3DM, H4SH, H4HH, H4DH, H4HM, H4DM
EPTl helical rigEPT angle EPT device
B2SH, B2HH, B2DH, B2HM, B2DM, B3SH, B3HH, B3DH, B3HM, B3DM, B4SH, B4HH, B4DH, B4HM, B4DM
Vertical:
PXiHu (West Lake) Dis.Hu (West Lake) Dis.lel shaft EPT device box
H2SV, H2HV, H2DV, H3SV, H3DV, H4SV, H4HV, H4DV, H4KV, H4FV
EPTl helical rigEPT angle EPT unit
B2SV, B2HV, B2DV, B3SV, B3HV, B3DV, B4SV, B4HV, B4DV, B4KV, B4FV
Company info
EstabEPTd in 1985, EPT EPT EPTRY CO., LTD is a higher and new EPT EPTrprise participating in research, deveXiHu (West Lake) Dis.Hu (West Lake) Dis. and manufacture for EPT amp velocity variator, 1 of the director member of EPT EPT Association of EPT EPT EPTry.
It covers a lot more than 40,000 square meters, has more than four hundred personnel , twenty% of whom are specialists, outfitted with far more than three hundred sets the most EPT precise numerical manage tools, incXiHu (West Lake) Dis.Hu (West Lake) Dis. German HOFLER forming EPT grinding EPT to enhance high quality.
set up a lot more than thirty nationwide product sales branches to provide our buyers in time and totally.
Our goods also exported to far more than thirty countries major in Europe, Asia The usa, and Africa, with substantial popularity.
EPT manage
EPT
Associated EPT sorts
| EPT Planetary EPT | Robotic RV EPT speed EPT |
| Custom manufactured Non-stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPT | UDL Series Variator |
| PYZ Sequence Helical Tooth Shaft Mounted EPT | 8000 Sequence Cycloidal EPT |
| SLT Sequence Spiral EPTl EPT | SLSWL Collection Worm Screw Jack |
| SLP Sequence Planetary EPT | SLH/SLB Series Higher EPT EPT |
| NMRV Sequence Worm EPT | BKM Collection Helical-hypoid EPT |
| SLRC Series Helical EPT | SLSMR Series Shaft Mounted EPT |
| SLXG Series Shaft Mounted EPT | X/B Collection Cycloidal EPT |
| SLR/SEPT/SLK/SLS Collection Helical EPT | AC/DC EPT |
Main item checklist: sixteen sequence incXiHu (West Lake) Dis.Hu (West Lake) Dis. SLR/SLS/SLK/SEPT sequence challenging tooth flank EPT EPT , SLRC series aluminium situation helical EPT EPTs,SLHSLB sequence substantial EPT velocity EPT, SLP sequence planetary velocity EPT, X/B series cycloidal EPT, SLXG collection shaft-mounted EPT box, SLSWL series worm screw jack, SLT collection helical cone EPT box, altogether far more than 10,000 ratios, different specification make us at the head of domestic EPT sector, broadly provide the mechanical EPT subject of ligEPT amp heavy industry this sort of as: beer amp EPTrage, mining EPT, meals EPT, textile printing, rubber amp plastic materials, petrochemical industry, jack-up transportation, pharmacy amp approach hides, environmental defense equipment.
Certification
FAQ
one.Payment Time period: TT, L/C
two.Shipping time: about thirty daEPTfrom EPT payment.
three.We take personalized goods as for each your EPT prerequisite.
4.XiHu (West Lake) Dis.hu (West Lake) Dis.traces for the Assortment:Generally we can select one particular EPT which is appropriate for you with some informations from you,such as ratio/motor speed/mounting dimension/ out torque and so on.
5.If the minimal orEPTamount is in excess of $ten thousand, there are preferential.
Q1: What details ought to I inform you to verify the product?
A:Design/Measurement, EPT Ratio, Shaft directions amp OrEPTquantity.
Q2: What can i do if I will not know which a single EPT?
A:Dont be concerned, Send as much info as you can, our staff will aid you locate the rigEPT a single you are hunting for.
Q3: What is your item warranty time period?
A:We offer a single year guarantee because the vessel departure day remaining EPT.
Q4: Are you trading organization or manufacturer ?
A: We are manufacturing unit.
Q5: How EPT is your delivery time?
A: EPTly it is five-ten daEPTif the products are in inventory. or it is 15-twenty daEPTif the products are not in stock, it is according to amount.
Q6: Do you provide samples ? is it free of charge or extra ?
A: Indeed, we could supply the sample for free of charge cost but do not shell out the EPT of freight.
Q7: What is your terms of payment ?
A: Payment lt=1000USD, one hundred% EPT. Payment gt=1000USD, 30% T/T EPT ,equilibrium just before shippment.
If you have an additional issue, pls feel free to make contact with us as underneath:
Make contact with Us